Translate

Thursday, January 9, 2014

The Cutting Edge


CAUTION: These knives are sharp and actually cut. Do not use in a child's dollhouse, and watch your fingers when you are making them.

If you need realistic knives for a kitchen or table setting, serrated knives are easy to make from the metal cutting strip from a box of aluminum foil or plastic wrap. Peel the strip from the box, then use old scissors or metal cutters to cut a piece about half the width of the strip and the length of the knife including the handle. Snip this strip at the point where you want the handle to end, cutting from the serrated edge to the middle of the strip. Trim off the serrated edge on this handle end, fold the handle in half lengthwise with pliers and squeeze to flatten. Trim the blade end to form either a pointed or slightly rounded end depending on what the knife will be used for, and round off the ends of the handle slightly. Finish by applying a few coats of paint or nail polish to the handle to thicken it and conceal the overlapped metal edge then seal with a clear sealer or clear nail polish. To vary the blade size, just make the starting strip wider or narrower.

Happy knife-making. :-D

Chris in Waterloo, ON